setting wereless router / hotspot area

Now we can start to configure wireless router, and I will use Linksys WRT54G Wireless Router as an example. This router supports 802.11g and backward compatible with 802.11b standard. The authentications supported are WEP, WPA/WPA2 authentication with pre-shared key or RADIUS server. In case you plan to get a new router, I recommend you to get one of these wireless routers.

Read the router manual before starting to configure it. This is useful for you to understand the router features and how to configure it. If the manual is not came together with router, you can download it from vendor website.

Sometimes the vendor will prepare some quick setup wizard to expedite router configuration, but I’m not going to explain this method here. I will explain some important and common setting which will be found in most of the wireless routers from different vendors, so you can use wizard to start the installation and then check out the details here.

Also register your product at vendor website if possible. You will be notified of firmware update, security alert and also product related information.

Open your popular web browser (Internet Explorer, Opera, Netscape Communicator), then type http://192.168.1.1 and press "Enter". This IP address is factory default IP assigned to the router, you will be able to find it in wireless router manual. That’s why I said it’s important to read the manual.

You need to set computer with the IP sits in the network same as wireless router, so you can only access and configure it. In this scenario, I set computer IP as 192.168.1.10 (you can set 192.168.1.X, X= number between 2 and 254), netmask as 255.255.255.0 and gateway as 192.168.1.1.

continue reading and referensi klik link : http://www.home-network-help.com/wireless-router.html
 http://resnet.uci.edu/routersetup.asp
http://www.kotainternet.com/setting-billing-hotspot-integrasi-router-mikrotik.html
http://www.kotainternet.com/konfigurasi-hotspot-mikrotik.html

Tweet